Product ID:MMM-A-134, TYPE I EPOXY CURING AGENT PART B
MSDS Date:04/27/1994
FSC:8040
NIIN:00-900-6296
Status Code:A
MSDS Number: CLKWJ

H.B. FULLER COMPANY

3500 LEXINGTON AVENUE N.
ST. PAUL, MN 55126-8076
US

Emergency Phone: 612-481-3300

Info Phone: 612-236-5300/ -5309 FAX

Preparer: ERNEST CARTER

Cage: 0DH19

H.B. FULLER COMPANY

ST. PAUL, MN 55126-8076 US

Telephone: 612-236-5300/ -5309 FAX

Cage: 0DH19

DIETHYLENETRIAMINE

CAS: 111-40-0

RTECS: IE1225000

OSHA PEL 1 PPM

ACGIH TLV: 4.2 MG/M3;1 PPM

POLYAMIDE RESIN

SILICA-AMORPHOUS

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:SEVERE EYE AND SKIN IRRITANT. VAPORS
HARMFUL SKIN SENSITIZER. INHALATION: OF VAPORS MAY CAUSE
IRRITATION. INGESTION: HARMFUL IF SWALLOWED.

First Aid:IF IN EYES: FLUSH WITH WATER FOR 15 MINUTES. IF ON SKIN: WASH
AFFECTED AREA WITH SOAP AND WATER. IF INGESTED: IF PERSON CAN
SWALLOW, GIVE ONE GLASS OF WATER OR MILK.

Flash Point:=204.4C, 400.F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:PERSONS EXPOSED TO PRODUCTS OF COMBUSTION
SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE
EQUIPMENT.

Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
MATERIAL.

Handling and Storage Precautions:AVOID SKIN CONTACT WITH PRODUCT AT ALL
TIMES.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:GENERAL DILUTION VENTILATION.
Protective Gloves:USING RUBBER GLOVES.
Eye Protection:SAFETY GLASSES.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
AVOID SKIN CONTACT AT ALL TIMES.
Supplemental Safety and Health

Boiling Pt:B.P. Text:NONE
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Spec Gravity:1.37
Appearance and Odor:LIQUID TAN MILD AMMONIA

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CAN YIELD LOW MOLECULAR WEIGHT
HYDROCARBONS, CARBON MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:CONSULT STATE, LOCAL OR PROVINCIAL AUTHORITIES
FOR MORE RESTRICTIVE REQUIREMENTS.

======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

SARA Title III Information:SECTION 313: THIS PRODUCT DOES NOT CONTAIN
REGULATED LEVELS OF ANY TOXIC CHEMICAL SUBJECT TO THE REPORTING
REQUIREMENTS OF SECTION 313 OF TITLE III OF THE SUPERFUND
AMENDMENTS AND REAUTHORIZATION ACT OF 1986 (SARA) AND CFR PART
372.
Federal Regulatory Information:SECTION 12(B)-EXPORT NOTICE
REQUIREMENTS: THIS PRODUCT CONTAINS A CHEMICAL SUBSTANCE THAT IS
CURRENTYL ON THE EPA'S SECTION 12(B) EXPORT LIST. WITHIN SEVEN DAYS
OF ENTERING INTO A CONTRACT TO EXPORT A ND CERTAINLY NO LATER THAN
THE DAY OF EXPORT, THE AGENT OF EXPORT MUST NOTIFY THE EPA OF THEIR
INTENT.
State Regulatory Information:CALIFORNIA PROPOSITION 65: THE SAFE
DRINKING WATER AND TOXIC ENFORCEMENT ACT OF 1986: